Product Overview; Controls - Toro 12004TC Operator's Manual

Product Overview

1. Steering wheel
2. Gear shift selector

Controls

Accelerator Pedal
The accelerator pedal (Figure 14) gives the operator the
ability to vary ground speed of the vehicle. Pressing the
pedal increases ground speed. Releasing the pedal will
slow the vehicle. Maximum forward speed is 18 mph
(26 km/h).
Figure 14
1. Accelerator pedal
Brake Pedal
The brake pedal is used to stop or slow the vehicle
(Figure 14).
6 2
3. Parking brake
4. Fuel cap
2. Brake pedal
1 3 5
4 7
Figure 13
5. Cargo box
6. Towing tounge
Brakes can become worn or can be misadjusted
resulting in personal injury.
If brake pedal travels to within 1 inch (25 mm)
of the vehicle floor board, the brakes must be
adjusted or repaired.
Parking Brake
The parking brake is between the seats (Figure 15).
Whenever the engine is shut off, the parking brake
must be engaged to prevent accidental movement of
the vehicle. To engage the parking brake, pull back on
the lever. To disengage, push the lever forward. If the
vehicle is parked on a steep grade, make sure that the
parking brake is applied. Place blocks at the downhill
side of the wheels.
1. Parking brake lever
17
G002180
7. Cargo box release lever
Figure 15