SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual
DSCP CoS Mapping
This window is used to view and configure DSCP CoS mapping.
Figure 11-6 DSCP CoS Mapping
The fields that can be configured are described below:
From Port / To Port: Select the appropriate port range used for the configuration here.
CoS: Select the CoS value. Options to choose from are 0 to 7.
DSCP List: Enter the DSCP list value to map to the CoS value here. This value must be between 0 and 63.
Click Apply to accept the changes made.
55