Error Disable Settings; Jumbo Frame - Fujitsu SH-E514TR1 10 User Manual

Gigabit ethernet smartpro switch

Table of Contents

SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual

Figure 7-4 Port Status

Error Disable Settings

This window is used to configure the error disable recovery settings.

Figure 7-5 Error Disable Settings

The fields that can be configured are described below:

ErrDisable Cause: Select the error disable causes here. Options to choose from are All, Port Security, and Storm

Control.

State: Select this option to enable or disable the auto-recovery for an error port caused by the specified cause.

Interval: Enter the time between 5 and 86400 seconds to recover the port.

Click Apply to accept the changes made for each individual section.

This window is used to view and configure the Jumbo Frame size and settings. The Switch supports jumbo frames.

Jumbo frames are Ethernet frames with more than 1,536 bytes of payload. The Switch supports jumbo frames with a

maximum frame size of up to 9,216 bytes.

Table of Contents