Advertisement
Upgrading a standalone ONA
Use this procedure to upgrade the ONA when you first receive it.
This method uses a PC to access the ONA's Manual Configuration
menu.
1.
From the PC that you are going to use for this upgrade
procedure, go to the Avaya Support website,
http://support.avaya.com, and download the ONA software
image that you want to use.
2.
Connect a PC to the RJ-45 port on the Device side of the
ONA.
3.
Insert a paper clip into the reset switch. Press and hold the
reset button before applying power to the ONA.
4.
Connect the cable from the network switch to the Network
side of the ONA for PoE power. If PoE power is unavailable,
connect an external power adapter.
5.
Continue pressing and holding the reset button until the
Status LED cycles through a steady red/green/blue. Then
release the reset button and the Status LED flashes a steady
amber, which indicates that the Manual Configuration menu
is running.
6.
On the PC, use a browser to connect to the ONA configura-
tion menu with the address http://192.168.100.1.
NOTE: You cannot go directly to this web page. You must complete
steps 1–5 first.
© 2016 Avaya Inc.
19
NN48800-300 01-07
(700511108)
Advertisement
