Advertisement
Modifying Manual Configuration parameters
To access the Manual Configuration menu to modify the parameters,
press and hold the reset button during a power on sequence.
Use the following procedure:
1.
Connect a PC to the RJ-45 port on the Device side of the ONA.
2.
Insert a paper clip into the reset switch. Press and hold the reset
button before applying power to the ONA.
3.
Connect the cable from the network switch to the Network side
of the ONA for PoE power. If PoE power is unavailable, connect
an external power adapter.
4.
Continue pressing and holding the reset button until the Status
LED cycles through a steady red/green/blue. Then release the
reset button. The Status LED will flash a steady amber, which
indicates that the Manual Configuration menu is running.
5.
On the PC, use a browser to connect to the ONA configuration
menu with the address http://192.168.100.1.
6.
Click Edit Parameters.
7.
Modify the configuration parameters that you want to change.
To enable Fabric Extend, change the Operational Mode
parameter to 1.
© 2016 Avaya Inc.
12
NN48800-300 01-07
(700511108)
Advertisement
