Pas Hca Articulating Hedge Clipper Attachment - Echo X7522340000 Safety Manual

• NEVER use unit within 15 meters (50 feet) of
any power lines or wires that may be conducting
electricity. Contact with wires carrying electrical
current can result in shock or electrocution.
• NEVER exceed the cutting capacity of the hedge
clippers - forcing the blades to cut materials thicker
than the hedge clipper is designed to handle will
result in jams, blade damage, and poor overall
performance.
• ALWAYS use a suitable tool such as a power
pruner or chain saw to cut branches larger than the
hedge clipper will allow.
• NEVER attempt to cut more than 6 inches from a
hedge or shrub in one cutting pass. Use multiple
passes for cleaner, safer cuts, and better control.
• ALWAYS stop engine and disconnect spark plug lead before removing a
blade obstruction.
• NEVER use dull, loose, or damaged blades. Keep blades properly adjusted
and lubricated at all times.
• NEVER adjust blades when engine is running. Shut engine off, and
disconnect spark plug lead from spark plug.
• ALWAYS use correct tools to perform blade adjustments. Use long
wrenches to keep hands away from sharp blade edges.
• ALWAYS place blade cover on blades when transporting or storing unit.
PAS HCA ARTICULATING HEDGE CLIPPER
ATTACHMENT
DANGER
Metal blades are very sharp and can cause
severe injuries, even if engine is off and blades
are not moving. Avoid contact with blades.
Wear gloves to protect hands.
• ALWAYS read, understand, and obey all hedge
clipper warnings, safety rules, and operating
instructions before using unit.
• ALWAYS shut unit off and make all cutting angle
adjustments on the ground.
Blade Cover
OPERATION
15 meters
(50 feet)
41