Echo X7522340000 Safety Manual page 17

Table of Contents

Advertisement

SRM/PAS/SB Blade Configuration
If you change the cutting attachment on your SRM, PAS,
or SB unit from nylon line head to a blade, you must also
install all of the parts required for blade operation. These
parts vary by type of blade being used, and may include
replacing the front handle with a U-Handle (See the SRM/
PAS/SB Set-Up Guide, Page 17)
DANGER
A trimmer-brushcutter unit equipped with a metal blade
can cause serious injuries if handled improperly.
ALWAYS use extreme care when carrying or handling
the unit to avoid contact with the cutting edges of the
blade. ECHO Inc. recommends using the optional
plastic blade cover to protect yourself and others from
accidental blade contact.
SRM/PAS/SB Blade Set-Up Guide
Use this configuration table as a guide for setting up your unit with a blade.
See the assembly instructions in your Operator's Manual or Blade Conversion
Kit for specific information.
To Use These
Blades
Handle
Debris
Shield
You
must
Harness
install
these
parts!
Blade
Mounting
Hardware
*
WARNING! DO NOT INSTALL BLADES ON GT (CURVED SHAFT
MODEL TRIMMERS
**
Arbor diameter of Upper Blade must match arbor diameter of metal blades.
*** New cotter pin required each time blade is installed.
**** Brushcutters over 16.5 lbs (7.5 kg) dry weight (weight w/o fuel) require a
double harness
SRM/PAS/SB SET-UP GUIDE*
Pro Maxi-
Rigid
Cut Grass/
Plastic Tri-
Weed
Cut Grass/
Plastic
Weed Blade
Cutters
Loop
Handle,
Handle w/
w/or w/o
Barrier Bar,
Barrier Bar
or U-Handle
Metal
Metal Shield Metal Shield
Shield
Shoulder
Shoulder
Harness
Harness
Upper
Upper Plate
Plate & Flat
& Glide Cup
Washer
Hex Nut
Hex Nut
New Cotter
New Cotter
Pin***
Pin***
Metal Tri-
Cut/8 Tooth
Grass/
Weed
Blade
Loop
Loop
Handle w/
Barrier Bar,
or U-Handle
Shoulder
Harness
Upper/
Lower Blade
Plates**
Hex Nut
New Cotter
Pin***
ASSEMBLY
U-handle/Blade Kit
Circular Blade
Cover
Metal 80T
Brush Blade
Metal 22T
Clearing
Saw Blade
U-Handle
Metal Shield
Shoulder
Harness****
Upper/
Lower Blade
Plates**
Hex Nut
New Cotter
Pin***
17

Advertisement

Table of Contents
loading

Table of Contents