Echo X7522340000 Safety Manual page 18

ASSEMBLY
PE Models
DANGER
Modification, improper assembly, or use of
unapproved blades or attachments, can result in
serious injury, engine failure, and voiding of warranty.
Use only blades and attachments approved for use on
PE Series power edger models.
Assemble unit only as instructed in Operator's
Manual, using parts provided with unit.
• NEVER modify edger or install blades or
attachments not approved by for use on model PE
power edgers.
• NEVER remove debris shield or deflector flap.
• NEVER install grass, weed, clearing, brushcutter,
or any other type of circular metal saw blades or
cutting attachment on an edger.
• ALWAYS use a new split pin each time blade is
installed or replaced.
• ALWAYS remember to remove locking bar,
T-wrench, and any other tools used to assemble
unit or tighten hardware.
• ALWAYS store assembly tools safely away from
the work area.
DANGER
Improper use of any trimmer, brushcutter, or PAS/
SB unit and attachment or Power Edger, can cause
serious or fatal injury. Moving edger blades and
attachments can cut through work gloves, protective
clothing, and footwear, and cause serious injuries.
Keep hands, feet, and all other body parts away from
spinning blades or attachments.
You must read, understand, and obey all safety and
operating instructions in this Safety Manual, your
unit's Operator's Manual, and in the Operator's
Manual or Installation Instructions provided with any
attachment, accessory, or parts kit that will be used.
18
Keep Hands/
Feet Away From
Edger Blade
PE POWER EDGER
PE Debris Shield
Deflector Flap