Echo X7522340000 Safety Manual page 19

All Front Loop Handle Models
Make sure the front loop handle is positioned
beyond the minimum handle spacing line, as
shown on the handle spacing decal on the drive
shaft housing. The minimum handle spacing line
indicates the minimum distance between the rear
handle and front handle, and helps ensure the
operator's hands are far enough apart to maintain
good control of the unit.
Final Assembly Check List
After assembly, check your unit to make sure guards, shields, protective
devices, and all other parts are properly and securely assembled and working
correctly. See the Operator's Manual for assembly details and part locations
for your unit.
• Make sure all required hardware has
been used and is properly tightened.
• Make sure throttle lock-out lever resets
when released.
• Make sure throttle trigger does not
operate unless throttle lockout lever is
depressed.
• Make sure throttle trigger returns to
normal position when released.
• Make sure stop switch operates properly,
moving feely between STOP and run
positions.
• Move STOP switch to stop position.
• Connect spark plug lead.
NEVER fuel, start, or operate your unit unless it is fully assembled, all shields
and required guards are in place, and the throttle lock-out lever and trigger are
working properly.
If parts are damaged, missing, or do not operate properly, or if you have
a problem assembling your unit, contact your Dealer for assistance or call
Consumer Product Support.
ASSEMBLY
Minimum Handle
Spacing Line
Minimum
Handle
Spacing
Stop Switch
Throttle Lock-
out Lever
Throttle Trigger
19