Check Tire Pressure - Toro 30799 Operator's Manual

Rear Castor Wheels
1. Remove hairpin cotter and cotter pin securing rear
castor pivot arm to deck bracket.
1
Figure 20
1. Rear castor pivot
2. Align the pivot arm holes with selected height-of-cut
bracket holes in the deck frame, install cotter pin and
secure with hairpin cotter.
Rear Deck Chain
1. Remove hair pin cotter and clevis pin securing
height-of-cut chain to chamber bracket.
2. Mount height-of-cut chain to desired height-of-cut hole
with clevis pin and hair pin cotter.
1
1. H.O.C chain

Check Tire Pressure

Ensure that the air pressure in the front and rear castor
wheels is 40 psi (276 kPa).
Important
Maintain even pressure in all tires to ensure
a good quality-of-cut and proper machine performance. Do
not under-inflate.
14
Figure 21