Setup; Loose Parts - Toro 30799 Operator's Manual

Setup

Note: Determine the left and right sides of the machine from the normal operating position.

Loose Parts

Note: Use this chart as a checklist to ensure that all parts necessary for assembly have been received. Without these parts,
total setup cannot be completed. Some parts may have already been assembled at the factory.
Description
Hose clamp
Hose bracket
Capscrew, 1/4 x 1 in.
Nut
Push arm adapter
Push arm plate
Capscrew, 3/8 x 2-3/4 in.
Flat washer
Nut
Front lift arm
Locknut
Capscrew, 3/8 x 3 in.
Rear lift bracket
Square U-bolt
U-bolt
Height-of-cut chain
Clevis pin
Hairpin
Nut
Capscrew, 3/8 x 7/8 in.
Roll pin
Danger decal
Parts catalog
Operator's manual
Registration card
Qty. Use
1
2
Install hose clamp
2
2
1
1
4 Install right push arm adapter
4
4
1
2
2
1
1
1
1 Install rear lift support
1
1
6
4 Secure covers for CE
1 Install drive shaft
1 Place over 54-9220 on deflector for CE.
1
1 Read before operating the machine.
1 Fill out and return to Toro.
7