Safety And Instruction Decals - Toro 30799 Operator's Manual

Safety and Instruction Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or lost.
93-3709
100-6582
1. Warning—Cutting hazard of hands
93-6696
1. Warning—part is spring loaded. Read the operator's manual.
100-8038
1. Height-of-cut setting for rear deck chain
1. Warning—torque the blade bolt to 115–149 N m. Read the
operator's manual for further instructions.
104-2526
1. Warning—read the operator's manual.
2. Lower cutting unit before going down hills. When operating the
Groundsmaster 325-D or 345 two-wheel drive or four-wheel
drive, rear weight must be added to the machine.
100-8046
4
93-7818
54-9220