Trunk - TP-Link EAP320 User Manual

Following is the page of Management Access.
MAC
Authentication:
MAC1~MAC4:

7.4 Trunk

TIPS:
Only the EAP330 has this function.
Following is the page of Trunk. By default the Trunk function is disabled.
Figure 7-8 Management Access Page
Check the box to enable MAC Authentication. After MAC Authentication is
enabled, only the PCs in MAC address list can log in the device's web
management page. By default this function is disabled. All PCs in LAN can log
in and manage the device.
Enter the MAC addresses of the PCs which are authorized to log in the device.
Figure 7-9 Trunk Setting
50