TP-Link EAP320 User Manual page 19

Open System: After you select Open System, clients can pass the

authentication and associate with the wireless network without password.
However, correct password is necessary for data transmission.
Shared Key: After you select Shared Key, clients has to input password to pass

the authentication, or it cannot associate with the wireless network or
transmit data.
You can configure four keys in advance and select one as the present valid key.
Key Selected:
Wep Key Select ASCII or Hexadecimal as the WEP key format.
Format:
ASCII: ASCII format stands for any combination of keyboard characters in the

specified length.
Hexadecimal: Hexadecimal format stands for any combination of

hexadecimal digits (0-9, a-f, A-F) in the specified length.
Select the WEP key length (64-bit, or 128-bit) for encryption.
Key Type:
64-bit: You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F

without null key) or 5 ASCII characters.
128-bit: You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-

F without null key) or 13 ASCII characters.
Key Value: Enter the key value.
WPA-Enterprise

Based on RADIUS server, WPA-Enterprise can generate different passwords for different users and
it is much safer than WPA-PSK. However, it costs much to maintain and is more suitable for
enterprise users. At present, WPA-Enterprise has two versions: WPA-PSK and WPA2-PSK.
Version: Select one of the following versions:



Figure 5-6 Security Mode_WPA-Enterprise
Auto: Select WPA-PSK or WPA2-PSK automatically based on the client
device's capability and request.
WPA-PSK: Pre-shared key of WPA.
WPA2-PSK: Pre-shared key of WPA2.
13