TP-Link EAP320 User Manual page 59

SNMP Agent: Enable SNMP Agent and the SNMP Agent will collect the information of this
device and respond to information requests from one or more management
systems.
Enter the textual identification of the contact person for this managed node.
SysContact:
SysName: Enter an administratively-assigned name for this managed node.
SysLocation: Enter the physical location of this managed node.
Community refers to a host group aiming at network management. Get
Get
Community: Community only has the read-only right of the device's SNMP information.
The community name can be considered a group password. The default
setting is public.
Get Source: Defines the IP address (for example, 10.10.10.1) or subnet for management
systems that can serve as Get Community to read the SNMP information of this
device. The format of subnet is "IP address/bit" (such as 10.10.10.0/24). The
default is 0.0.0.0, which means all hosts can read the SNMP information of this
device.
Set Community: Set Community has the read and write right of the device's SNMP
information. Enter the community name that allows read/write access to the
device's SNMP information. The community name can be considered a group
password. The default setting is private.
Defines the IP address (for example, 10.10.10.1) or subnet for management
Set Source:
systems that can serve as Set Community to read and write the SNMP
information of this device. The format of subnet is "IP address/bit" (such as
10.10.10.0/24). The default is 0.0.0.0, which means all hosts can read and write
the SNMP information of this device.
Figure 7-12 SNMP Page
53