Portal Authenticated Guest - TP-Link EAP320 User Manual

Access Point: Displays the name of the device to which the client is connected.
SSID: Displays the SSID the client is connected to.
SNR(dB): Signal to Noise Ratio, the power ratio between the received wireless signal
strength and the environmental noise strength. The bigger the value of SNR, the
better network performance the device provides.
Displays the wireless Client Connection Quality (CCQ). CCQ refers to the ratio of
CCQ(%):
current effective transmission bandwidth and the theoretically maximum
available bandwidth. CCQ reflects the actual link condition.
Rate(Mbps): Displays the data rate at which the client transmits wireless packets.
Displays the throughput of the downstream data.
Down(Byte):
Up(Byte): Displays the throughput of the upstream data.
Active Time: Displays the amount of time the client has been connected to the device.

6.3.2 Portal Authenticated Guest

The Portal Authenticated Guest displays information about clients that have set up valid
authentication.
MAC: Displays the MAC address of the authenticated client.
Band: Displays the band the authenticated client is in.
Displays the name of the device to which the authenticated client is connected
Access Point:
SSID: Displays the SSID the authenticated client is connected to.
SNR(dB): Signal to Noise Ratio, the power ratio between the received wireless signal
strength and the environmental noise strength. The bigger the value of SNR, the
better network performance the device provides.
CCQ(%): Displays the Client Connection Quality (CCQ) of the authenticated client. CCQ
refers to the ratio of current effective transmission bandwidth and the
theoretically maximum available bandwidth. CCQ reflects the actual link
condition.
Figure 6-13 Portal Authenticated Guest
44