Led On/Off; Ssh - TP-Link EAP320 User Manual

Enable:
Mode:

7.5 LED ON/OFF

Following is the page of LED ON/OFF. By default the LED is on.

7.6 SSH

This device supports the SSH Server function that allows users to login and manage it through
SSH connection on the SSH client software.
SSH (Secure Shell) is a security protocol established on application and transport layers. SSH-
encrypted-connection is similar to a telnet connection, but essentially the old telnet remote
management method is not safe, because the password and data transmitted with plain-text
can be easily intercepted. SSH can provide information security and powerful authentication
when you login this device remotely through an insecure network environment. It can encrypt
all the transmission data and prevent the information in remote management from being leaked.
Check the box to enable Trunk.
The Trunk function can bundles multiple Ethernet links into a logical link to
increase bandwidth, improve reliability, and make load balanced.
The EAP330 has two 1000Mbps Ethernet port. If the Trunk function is enabled
and the ports are in the speed of 1000Mbps Full Duplex, the whole
bandwidth of the Trunk is up to 4Gbps (2000Mbps * 2) because the
bandwidth of each member port is 2000Mbps.
Select the applied mode of Trunk Arithmetic. The device will choose the port
to transfer the packets based on the mode of Trunk Arithmetic.
•
SRC MAC + DST MAC: When this option is selected, the arithmetic will
be based on the source and destination MAC addresses of the packets.
•
DST MAC: When this option is selected, the arithmetic will be based on
the destination MAC addresses of the packets.
•
SRC MAC: When this option is selected, the arithmetic will be based on
the source MAC addresses of the packets.
Figure 7-10 LED ON/OFF
51