Table of Contents
Advertisement
Basic Connection
1
2
2
1. Use a standard network cable to connect the camera to the network.
2. Connect the camera to power using one of the following methods:
•
Connect the camera to a 12VDC power source using the supplied Power Pigtail Cable.
•
Connect the camera to a 24VAC~ power source using the supplied Two-Pin Terminal Block.
•
Using the PoE function and the power will be provided over the network cable.
3. Optionally connect the camera to a monitor using the supplied video Test-Out BNC Cable.
4. Optionally connect the camera to the speakers and microphones. Note that the audio input /
output features a line 3.5mm jack (TRS). Be sure to prepare speakers / microphones with TRS
connector. Also, speakers and microphones with a (built-in) amplifier and external power supply
are required. You can also use the built-in Microphone on the front panel of the camera (See
Physical Description
5. Optionally connect the camera to the input / output devices.
After powering the camera, the power LED will be lit in red and you can access the live view and
adjust the image clarity.
for more details).
5
7
EAN7221/7260/7360
3
4
4
Advertisement
Table of Contents
