Table of Contents
Advertisement
1. Physical Description
No. Item Name
1
Auto Iris Lens Connector
2
Microphone
3
Light Sensor
4
Ethernet / PoE
5
Power LED
6
DC 12V Port
7
Alarm
8
Audio In
9
Audio Out
10
AC 24V Port
11
Micro SD / SDHC Card Slot Insert a micro SD / SDHC card to store recording data.
12
Video Out
13
USB
14
Reset Button
1
2
Descriptions
Plug the iris control cable to the connector.
One built-in microphone.
Detects lights.
Connects to a 10BASE-T / 100BASE-TX Ethernet or PoE.
After powering the camera, the power LED will be lit in red.
Connects to 12VDC power.
Connects to I/O devices (see
later).
Connects to microphones (In) / Speakers (Out). Note that the
audio input / output features a line 3.5mm jack (TRS). Be sure
to prepare microphones / speakers with TRS connector (see TRS
Connector image below). Also, microphones / speakers with a
(built-in) amplifier and external power supply are required.
Connects to 24VAC~ power.
Connects to a portable monitor using the supplied BNC cable
for testing the camera view during initial installation.
USB slot is currently reserved.
Press and hold the button for 6 seconds to reset all
configurations to factory default.
1
10 11
3
4
5
6
7
I/O Terminal Block
EAN7221/7260/7360
12
13
14
8
9
for more details
Advertisement
Table of Contents
