Lorex SG7864R Instruction Manual page 9

5. MENU BUTTON – The monitor has a number of programmable features available by using
the Menu option. To enter the Menu selection, press the MENU button. The main menu as
identified will appear.
NOTE: TWO OPTIONS ARE AVAILABLE FOR CHANGING OPTIONS WITHIN THE MAIN
MENUS.
Monitor Panel - Use the
front of the monitor to move around the screen.
Remote Control - Use the
around the screen
TITLESET - This button allows the user to title each camera. A total of up to 8 characters
is available. Use the
complete, press the MENU button until you exit this menu
SEQUENCE - This function is used in auto mode. The camera will automatically rotate
Between the four camera locations in AUTO mode. The monitor has been defaulted to a
1-2-3-4-Q (quad) setting. Use the
change the sequence settings. When complete press the menu button.
SCAN DWELL TIME - This function is used in auto mode. It controls the speed to which the
monitor moves from one camera to another. The setting is defaulted to 1 second but can be
adjusted to 1 - 60 seconds. Use the
complete press the menu button
MAIN MENU
1. TITLE SET
2. SEQUENCE
3. SCAN DWELL TIME
4. ALARM RESET TIME
5. TIME/DATE
6. EXIT
(Up/Down) and
(CA1/CA2) and
(up/down) and
(up/down) and
(up,down)buttons to set the dwell time. When
(left/right) arrow buttons located on the
(CA3/CA4) buttons to move
(left/right) buttons to set the titles. When c
(left/right) buttons to
-6-