Taking A Series Of Pictures (Continuous Shooting/Burst Shooting/16-Frame Shooting Mode) - Pentax Optio RS1000 Operating Manual

Pentax optio rs1000: user guide
Table of Contents

Advertisement

When the camera detects a face, the Face Detection function is
activated and the face detection frame appears (p.67).
3
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
4
Press the shutter release button fully.
When set to g, the self-timer lamp lights. The self-timer lamp blinks
during the last 3 seconds before shooting or when set to Z.
The picture is taken ten seconds or two seconds later.
3
• Focusing may be compromised if you move the camera while the self-
timer lamp is blinking when taking still pictures.
• The self-timer lamp does not light up or blink in H (Pet) mode.
• In C (Movie) mode, recording will start after ten seconds (or two seconds).
• Press the shutter release button halfway while the self-timer is engaged
to stop the countdown and press fully to restart the countdown.
• Z cannot be selected while 9 (Green) mode is in default setting. Select
Z in another shooting mode and then switch the shooting mode to 9.
Taking a Series of Pictures (Continuous Shooting/
Burst Shooting/16-frame Shooting Mode)
In these modes, pictures are taken continuously as long as the shutter
release button is pressed.
Continuous
j
Shooting
Burst
K
Shooting
16-frame
I
shooting
86
Each time a picture is taken, the image is saved in the memory
before the next image is taken. The higher the image quality, the
longer the interval between shots.
The number of recorded pixels is fixed at f (2592×1944) and
the interval between shots is shorter than "Continuous Shooting".
16 pictures are taken continuously at 1/7.5 second intervals.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Optio nb1000

Table of Contents