7. Connect the cables and power cords. For more information, see "Connecting
Connecting the cables
Notes:
1. Be sure to turn off the server before you connect any cables to or disconnect
2. For additional cabling instructions, see the documentation that comes with the
3. Cable identifiers are printed on the cables that come with the server and
the cables."
any cables from the server or hot-plug adapter.
optional devices. It might be easier for you to route any cables before you install
certain optional devices.
optional devices. Use these identifiers to connect the cables to the correct
connectors. For example, the hard disk drive cables are labeled "HDD option."
Chapter 2. Installing optional devices
99