Checking The Configuration; Configuring Cpcar - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - QoS
l
----End

2.3.6 Checking the Configuration

Context
The configurations of traffic policing based on complex traffic classification are complete.
Procedure
l
l
l
l
l
----End

2.4 Configuring CPCAR

This section describes how to configure traffic policing for packets sent to the CPU.
2.4.1 Establishing the Configuration Task
2.4.2 Configuring CPCAR
2.4.3 Checking the Configuration
Issue 03 (2009-08-20)
You can apply only one traffic policy in the inbound or outbound direction of an
interface.
Applying a traffic policy in a VLAN
1. Run:
system-view
The system view is displayed.
2. Run:
vlan vlan-id
The VLAN view is displayed.
3. Run:
traffic-policy policy-name { inbound | outbound }
A traffic policy is applied in a VLAN in the inbound or outbound direction.
You can apply only one traffic policy in the inbound or outbound direction in a VLAN.
Run the display traffic behavior { system-defined | user-defined } [ behavior-name ]
command to check the configuration of the traffic behavior.
Run the display traffic classifier { system-defined | user-defined } [ classifier-name ]
command to check the configuration of the traffic classifier.
Run the display traffic policy { system-defined | user-defined } [ policy-name ]
[ classifier classifier-name ] ] command to check the configuration of the traffic policy.
Run the display traffic-policy policy-name applied-record command to check the
application of the traffic policy.
Run the display qos car { all | car- name } command to check the configuration of QoS
CAR.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Traffic Policing and Traffic Shaping Configuration
2-13