Maintaining Class-Based Qos; Displaying The Flow-Based Traffic Statistics; Clearing The Flow-Based Traffic Statistics - Huawei Quidway S9300 Configuration Manual

1 Class-based QoS Configuration
Procedure
l
l
l
l
----End

1.6 Maintaining Class-based QoS

This section describes how to maintain class-based QoS.

1.6.1 Displaying the Flow-based Traffic Statistics

1.6.2 Clearing the Flow-based Traffic Statistics

1.6.1 Displaying the Flow-based Traffic Statistics
Context
To view the flow-based traffic statistics, a traffic policy must exist and contain the traffic
statistics action.
Procedure
l
----End
1.6.2 Clearing the Flow-based Traffic Statistics
Context
The flow-based traffic statistics cannot be restored after you clear them. So, confirm the action
before you use the command.
1-24
Run the display traffic behavior { system-defined | user-defined } [ behavior-name ]
command to check the configuration of the traffic behavior.
Run the display traffic classifier { system-defined | user-defined } [ classifier-name ]
command to check the configuration of the traffic classifier.
Run the display traffic policy { system-defined | user-defined } [ policy-name ]
[ classifier classifier-name ] ] command to check the configuration of the traffic policy.
Run the display traffic-policy policy-name applied-record command to check the
application of a specified traffic policy.
Run the display traffic policy statistics { global [ slot slot-id ] | interface interface-type
interface-number | vlan vlan-id } { inbound | outbound } [ verbose { classifier-base |
rule-base } [ class class-name ] ] command to check the flow-based traffic statistics.
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - QoS
Issue 03 (2009-08-20)