Deleting Clips; Displaying The Expand Clip Screen - Sony PMW-150 Operating Instructions Manual

Deleting Clips

You can delete clips from the SxS memory card.
Select "DELETE CLIP" from the Clip Operation
menu.
Note
Clips with an OK mark and flagged clips set to LOCK
CLIP cannot be deleted.
To delete them, release the OK mark or the LOCK CLIP
setting before performing the delete operation.
Deleting clips collectively
By using the Setup menu, you can delete clips
from an SxS memory card collectively.
Select "All Clips DEL" in "Clip" (page 92) in the
OTHERS menu.
Notes
• If the memory card contains clips of both HD and SD
Mode, only the clips of the currently selected mode are
deleted.
• Clips with an OK mark and flagged clips set to LOCK
CLIP cannot be deleted.
Displaying the EXPAND CLIP
Screen
In UDF and FAT HD Mode, the EXPAND CLIP
screen permits you to divide a clip into 12 blocks
of equal duration and show a thumbnail image of
the first frame of each block on the screen.
In FAT SD Mode, the EXPAND CLIP screen
shows the thumbnail images of the first frames of
the segment files only for a clip segmented
because its file size exceeded 2 GB.
This helps you to quickly cue up to a desired
scene in a clip of long duration.
You can display the EXPAND CLIP screen by
selecting the clip on the thumbnail screen.
1
Select a clip on the thumbnail screen,
then press the SEL/SET button or the
jog dial.
The corresponding Clip Operation menu
pops up.
2
Select "EXPAND CLIP."
The EXPAND CLIP screen appears for the
clip that you selected on the thumbnail
screen.
66 Clip Operations
EXPAND CLIP screen in UDF and FAT HD
Mode
120min EXPAND CLIP
01 : 10 : 20 : 00 01 : 10 : 30 : 00
01 : 11 : 00 : 00 01 : 11 : 10 : 00
S1 S2
01 : 11 : 40 : 00 01 : 11 : 50 : 00
01 / JAN / 2009 10 : 53 S&Q 29 / 24
JPAN0011 ( 1 )
HQ 1920 / 23 . 9 P
Detailed information for the clip is displayed at
the bottom of the screen.
The items other than the following are the same as
those on the normal thumbnail screen (page 59):
1.
Frame information
The following icons show the marking for the
frame at the cursor.
Index frame
Frame with shot mark 1 added
S1
S2 Frame with shot mark 2 added
The same icons may also be displayed below the
thumbnail image of each frame. If the frame has
multiple markings, one of the icons is displayed,
in the priority order of index frame, shot mark 1,
and shot mark 2.
2.
Timecode indication
The timecode of the frame at the cursor is
displayed.
Current frame number
0000123
01 : 10 : 40 : 00 01 : 10 : 50 : 00
01 : 11 : 20 : 00 01 : 11 : 30 : 00
01 : 12 : 00 : 00 01 : 12 : 10 : 00
S2 S1
TCR 01 : 10: 20 : 00
DUR 00 : 03 : 19 : 23
1 2