Deleting Clips - Sony PXW-X500 Manual

Solid-state memory camcorder
Hide thumbs Also See for PXW-X500:
Table of Contents

Advertisement

ABCD0002(1) t ABCD0002(2)
ABCD0005(3) t ABCD0005(4)
• If the parenthetical numbers (1) to (999) already
exist at the copy destination, it is not possible to
copy any more clips under that name.
• A message appears if there is not enough free
space on the copy destination SxS memory
card. Exchange the card for one with more free
space.
• When multiple clips are recorded on the source
SxS memory card, it may not be possible to
copy all clips even when the source and
destination memory cards have the same
capacity, depending on the memory
characteristics and usage of the memory cards.
To copy a specific clip
1
Select Thumbnail >Copy Clip >Select
Clip in the setup menu.
2
Turn the MENU knob to select
[Execute], then press the knob.
The clip selection screen appears.
3
Turn the MENU knob to select a clip to
copy, then press the knob.
A check mark is attached to the selected clip.
4
Simultaneously press the SET button
and SHIFT button.
A confirmation screen appears.
5
Turn the MENU knob to select
[Execute], then press the knob.
The clip is copied, and a completion message
appears.
6
Press the MENU knob to dismiss the
message.
To copy all clips
You can copy all clips stored on the same SxS
memory card at the same time to another SxS
memory card.
1
Select Thumbnail >Copy Clip >All
Clips in the setup menu.
2
Turn the MENU knob to select
[Execute], then press the knob.
A confirmation screen appears.
3
Turn the MENU knob to select
[Execute], then press the knob.
All clips are copied, and a completion
message appears.
4
Press the MENU knob to dismiss the
message.

Deleting Clips

You can delete clips from SxS memory cards.
Clips can be deleted on the thumbnail screen or
the filtered clip thumbnail screen (see page 116).
1
Select Thumbnail >Delete Clip >Select
Clip in the setup menu.
2
Turn the MENU knob to select
[Execute], then press the knob.
The clip selection screen appears.
3
Turn the MENU knob to select a clip to
delete, then press the knob.
A check mark is attached to the selected clip.
4
Simultaneously press the SET button
and SHIFT button.
A confirmation screen appears.
5
Turn the MENU knob to select
[Execute], then press the knob.
The clip is deleted, and a completion
message appears.
6
Press the MENU knob to dismiss the
message.
The clips below the deleted clip on the thumbnail
screen move up one position.
To delete all clips
You can delete all clips stored on the same SxS
memory card at the same time.
Notes
• Deleted clips cannot be restored.
• If the media or clip is protected, this function is
disabled.
1
Select Thumbnail >Delete Clip >All
Clips in the setup menu.
114

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents