Sony PMW-150 Operating Instructions Manual page 108

Output formats from the i.LINK I/O connector
Serial digital signals from the i.LINK I/O connector are output in the following formats depending on the
settings of the setup menu and format of the clip being played.
Note
When "SDI/HDMI/i.LINK I/O Select" in the VIDEO SET menu is set to "HD SDI & HD HDMI," "SD SDI & SD HDMI
i," or "SD HDMI P," signals are not output from the i.LINK I/O connector.
While recording (or standing by to record)
"Format" in "System" in
the OTHERS menu
HQ 1920/50i
HQ 1440/50i
HQ 1920/25P
HQ 1440/25P
SP 1440/50i
HQ 1280/50P
HQ 1280/25P
DVCAM50i SQ/EC
DVCAM25P SQ/EC
1)
50i provided through conversion from 50P.
108 Formats and Limitations of Outputs
Setting of "SDI/HDMI/i.LINK I/O Select" in the VIDEO SET menu
HD HDMI & HDV
SD HDMI i & HDV
SD HDMI P & HDV
No signal
1440×1080/50i
No signal
Output format
SD HDMI i & DVCAM
SD/50i
SD/25PsF
SD/50i
1)
SD/50i
SD/25PsF
SD/50i
SD/25PsF