Sony PMW-150 Operating Instructions Manual page 94

OTHERS
Menu items Subitems and setting values Contents
Properties
Clear
Clip Name Disp
Network
DHCP
Setting for
network
IP Address
connections
Note
Subnet Mask
The CBK-WA01
Wi-Fi Adapter is
required.
Default Gateway
User Name
Password
Set
94 Setup Menu List
Execute / Cancel
Execute / Cancel
Title1 (ASCII) / Title2 (UTF-8)
Enable / Disable
0.0.0.0 to 255.255.255.255
(192.168.1.10)
0.0.0.0 to 255.255.255.255
(255.255.255.0)
0.0.0.0 to 255.255.255.255
(0.0.0.0)
(admin)
(pmw-150)
Execute / Cancel
Select "Execute" to display the detailed information of the
planning metadata loaded in the camcorder.
File Name: Filename
Assign ID: Assignment ID
Created: Time and date of creation
Modified: Time and date of most recent modification
Modified by: Name of person who modified the file
Title1: Title1 specified in file (clip name in ASCII format)
Title2: Title2 specified in file (clip name in UTF-8 format)
Material Gp: Number of material groups (groups of clips
recorded using the same planning metadata)
Shot Mark1: Name defined for Shot Mark 1
Shot Mark2: Name defined for Shot Mark 2
When you select "File Name," "Assign ID," "Title1," or
"Title2" on the Planning Metadata Properties screen and then
press the SEL/SET button or the jog dial, the selected item is
displayed on the full screen, permitting you to check a long
file or clip name at a glance.
Note
Names of shot marks cannot be displayed on the full screen
even if you select Shot Mark1 or Shot Mark2.
Select "Execute" to clear the planning metadata loaded in the
camcorder.
Select the display mode of the clip name specified in planning
metadata.
Note
When both an ASCII format name and a UTF-8 format name
are specified in planning metadata, the UTF-8 format string is
used as the clip name. If only either ASCII-format name or
UTF-8 format name is specified in planning metadata, the
specified name is displayed regardless of the menu setting.
Select whether to acquire the IP address automatically from a
DHCP server (Enable) or not (Disable).
Set the IP address when "DHCP" is set to "Disable."
Set the subnet mask when "DHCP" is set to "Disable."
Set the default gateway when "DHCP" is set to "Disable."
Set a desired user name in 1 to 31 alphanumeric characters.
Sets a password in 0 to 31 alphanumeric characters.
Note
Each password character is displayed as " * ".
Confirms the "Network"settings.
Select "Execute" to confirm.