Automatic Audio Input Selection Setup (Tx-Sr576 Only) - Onkyo TX-SR506 Instruction Manual

First Time Setup—Continued
Automatic Audio Input Selection
Setup (TX-SR576 only)
STANDBY/ON
STANDBY ZONE 2
PURE AUDIO
PURE AUDIO MULTI CH DVD
PHONES
ZONE 2 OFF TONE
When an input source is selected, the AV receiver checks
the relevant audio inputs for the presence of an audio
signal and automatically selects an input. With this set-
ting, you can specify which audio inputs the AV receiver
will check for signals.
1
Press the input selector button
for the input selector whose set-
ting you want to change.
The setting for the TUNER input selec-
DVD VCR/DVR CBL/SAT
tor cannot be changed and is fixed at
"Analog."
AUX TAPE TUNER
CD
2
Press the [DIGITAL INPUT]
button.
DIGITAL INPUT
The current setting is displayed.
44
TUNING PRESET
ENTER
VCR/DVR CBL/SAT AUX TAPE TUNER CD SETUP RETURN
SETUP MIC VIDEO
MOVIE/TV MUSIC GAME DISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE
CLEAR
1 2, 3
3
DIGITAL INPUT
MASTER VOLUME
AUX INPUT
L AUDIO R
Note:
• You can select a different option for each input selec-
tor.
Press the [DIGITAL INPUT] but-
ton repeatedly to select an
option.
Auto:HDMIx
This option can be selected when an
HDMI input is assigned to an input
selector (page 39). When this option is
selected, the relevant HDMI, digital,
and analog inputs will be checked for
the presence of an audio signal. If sig-
nals are present at more than one input,
the inputs will be selected in the follow-
ing order of priority: HDMI, digital,
analog.
Auto:COAXx/Auto:OPTx
This option can be selected when a dig-
ital input is assigned to an input selector
(page 42). When this option is selected,
the relevant digital and analog inputs
will be checked for the presence of an
audio signal. If signals are present at
more than one input, the inputs will be
selected in the following order of prior-
ity: digital, analog. Any audio signals
present at the HDMI inputs will not be
output.
Analog
When this option is selected, the signal
from the relevant analog audio input is
output. Any audio signals present at
HDMI or digital inputs will not be out-
put.