Component Video Input Setup - Onkyo TX-SR506 Instruction Manual

First Time Setup—Continued

Component Video Input Setup

If you connect a video component to a COMPONENT
VIDEO IN, you must assign that input to an input
selector. For example, if you connect your DVD player
to COMPONENT VIDEO IN 2, you must assign COM-
PONENT VIDEO IN 2 to the DVD input selector.
By default, the DVD input selector is assigned to COM-
PONENT VIDEO IN 1, and all of the other input selec-
tors (i.e., VCR/DVR, CBL/SAT, AUX) are assigned to
the "- - -" option.
For TX-SR506
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
2
Use the Up and Down [
buttons to select "2.Component,"
and then press [ENTER].
3
Use the Up and Down [
buttons to select an input selec-
tor, and use the Left and Right
[ ]/[ ] buttons to select:
IN1: Select if the video component
is connected to COMPO-
NENT VIDEO IN 1.
IN2: Select if the video component
is connected to COMPO-
NENT VIDEO IN 2.
No: Select if you're not using the
COMPONENT VIDEO
OUT.
4
Press the [SETUP] button.
Setup closes.
Note:
• This procedure can also be performed on the AV
receiver by using its [SETUP], [ENTER], and arrow
buttons.
For TX-SR576
1
2
3
]/[ ]
4
]/[ ]
5
Note:
• This procedure can also be performed on the AV
receiver by using its [SETUP], [ENTER], and arrow
buttons.
Press the [RECEIVER] button,
followed by the [SETUP] button.
Use the Up and Down [
buttons to select "1.Input
Assign," and then press
[ENTER].
Use the Up and Down [
buttons to select "1-2.Compo-
nent," and then press [ENTER].
Use the Up and Down [
buttons to select an input selec-
tor, and use the Left and Right
[ ]/[ ] buttons to select:
IN1: Select if the video compo-
nent is connected to COM-
PONENT VIDEO IN 1.
IN2: Select if the video compo-
nent is connected to COM-
PONENT VIDEO IN 2.
- - - - -: Select if you're not using the
COMPONENT VIDEO
OUT.
Press the [SETUP] button.
Setup closes.
]/[ ]
]/[ ]
]/[ ]
41