Input Source Selection And Surround Setup - Onkyo TX-DS656 Instruction Manual

Input source selection and surround setup

Before you can enjoy music or movies, you must select an input source and perform surround setups. This can be done in one of the following three ways:
• Display the Menu on the TV screen and use the cursor buttons and ENTER button on the remote controller.
• Use the unit's front panel operation buttons.
• Use the remote controller operation buttons
For how to play source equipment connected to the MULTI CHANNEL INPUT connector, see page 29.
For how to use the built-in tuner, see "Listening to FM/AM broadcasts" on page 32.
a
*** Menu ***
Input Selector
Rec Selector
Surround Setup
Screen Setup
System Setup
b
** Input Selector **
Picture
Sound
TAPE-2 Moni. = OFF
Input Mode=Digital-1
Surround
Mode= STEREO
POWER button
Cursor buttons/
ENTER button
= VIDEO-1
= VIDEO-1
SUBROOM
SENDING/
LEARNED A B LEARN
TEST SUR
POWER SLEEP DIMMER
TONE MODE
M UL TI-CH
SOURCE SELECTOR
DVD VIDEO-1 VIDEO-2 VIDEO-3 INPUT
TAPE-1 TAPE-2 TUNER PHONO C D
PROGRAMMABLE AREA TV VIDEO /
POWER C H VOLUME
POWER TV/ VCR
TUNER
GROUP PRESET
C D TAPE
DISC
SUBTITLE DVD
ON / OFF
PAUSE
/ STEP CH SEL
CURSOR
LEVEL VOLUME
ENTER
MUTING
/ REMOTE
SPEAKER
RC-373M
REMOTE CONTROLLER
Using the on-screen Menu
If your TX-DS656 is connected to a TV set, you can perform settings
on the TV screen. For further information about using the on-screen
Menu, see "Selecting a Menu item" on page 19.
In the following procedure, use the remote controller unless otherwise
specified.
1. Press the POWER button.
Note:
If the SPEAKERS MAIN indicator is not lit on the display, press
the SPEAKERS MAIN button on the unit's front panel to make it
appear on the display.
2. Press the ENTER button.
The Menu appears on the TV screen. (a)
3. Select "Input Selector" using the y or u cursor button, then
press the s cursor button.
The Input Selector screen appears. (b)
4. Select the desired item(s) using the y or u button.
The item (or items) you select changes each time you press the y
or u button.
"Picture" only
"Picture" and "Sound"
"Sound" only
To set different input sources for "Picture" and "Sound"...
If you wish to enjoy CD sounds while watching DVD pictures on
TV, for example, repeat steps 4 and 5 to set different input sources
for the "Picture" and "Sound" items.
25