Playing Your Av Components; Basic Av Receiver Operation - Onkyo TX-SR506 Instruction Manual

Playing Your AV Components

Basic AV Receiver Operation

STANDBY/ON
STANDBY ZONE 2
PURE AUDIO
PURE AUDIO MULTI CH DVD
PHONES
ZONE 2 OFF TONE
1
Remote
AV receiver
controller
DVD VCR/DVR CBL/SAT
AUX TAPE TUNER
CD
2
3
Remote
AV receiver
controller
MASTER VOLUME
4
3
TUNING PRESET
ENTER
VCR/DVR CBL/SAT AUX TAPE TUNER CD SETUP RETURN
AUX INPUT
SETUP MIC VIDEO L
MOVIE/TV MUSIC GAME DISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE
CLEAR
1
Use the AV receiver's input selector buttons to select an input source.
To select an input source with the remote controller, press its INPUT
SELECTOR buttons.
To listen to a DVD player connected to the multichannel DVD input (page 24), press
the AV receiver's [MULTI CH] button. The MULTI CH indicator will appear on the
display.
Note:
• While the multichannel DVD input is selected, the Speaker Configuration settings on
page 67 are ignored, and signals from the multichannel input are fed to the speakers
as they are.
Start playback on the source component.
To watch a DVD or other video source, on your TV, select the video input that's con-
nected to the AV receiver's COMPONENT VIDEO OUT, HDMI OUT, or MONITOR
OUT.
On some DVD players, you may need to change the digital or HDMI audio output
settings.
To adjust the volume, use the MASTER VOLUME control or the remote
controller's [VOL] button.
Since the AV receiver is designed for home theaters, it has a wide volume range for
precise adjustment. The volume can be set to Min, 1 through 79, or Max.
Select a listening mode and enjoy!
See "Using the Listening Modes" on page 55.
MASTER VOLUME
AUDIO R
1
3
45