Digital Input Setup - Onkyo TX-SR506 Instruction Manual

First Time Setup—Continued

Digital Input Setup

STANDBY/ON
STANDBY ZONE 2
PURE AUDIO
PURE AUDIO MULTI CH DVD
PHONES
TONE
ZONE 2 OFF
If you connect a component to a digital audio input, you
must assign that input to an input selector. For example,
if you connect your CD player to OPTICAL IN 1, you
must assign OPTICAL IN 1 to the CD input selector.
These are the default assignments.
Input selector
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
CD
For TX-SR506
1
Press the input selector button
for the input selector that you
want to assign.
The TUNER input selector cannot be
DVD VCR/DVR CBL/SAT
assigned and is fixed at the "- - -"
option.
AUX TAPE TUNER
CD
2
Press the [DIGITAL INPUT]
button.
DIGITAL INPUT
The current assignment is displayed.
3 Press the [DIGITAL INPUT] but-
ton repeatedly to select an
DIGITAL INPUT
option.
COAX1: Select if the component is
COAX2: Select if the component is
OPT1: Select if the component is
42
TUNING PRESET
ENTER
VCR/DVR CBL/SAT AUX TAPE TUNER CD
SETUP RETURN
SETUP MIC VIDEO
MOVIE/TV MUSIC GAME DISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE
CLEAR
1 2, 3
Audio input
COAX1
OPT1
COAX2
- - -
- - -
OPT2
connected to DIGITAL IN
COAXIAL 1.
connected to DIGITAL IN
COAXIAL 2.
connected to DIGITAL IN
OPTICAL 1.
MASTER VOLUME
AUX INPUT
L AUDIO R
ENTER
SETUP
For TX-SR576
1
2
OPT2: Select if the component is
connected to DIGITAL IN
OPTICAL 2.
- - -: Select if the component is
connected to an analog
input.
Press the [RECEIVER] button,
followed by the [SETUP] button.
Use the Up and Down [
buttons to select "1.Input
Assign," and then press
[ENTER].
RECEIVER
]/[ ]