3. Place the roll paper on a flat surface so that it does not unwind.
Slide the roll paper onto the spindle and onto the white flange
until it fixes into place.
Note:
Do not stand the spindle when attaching the roll paper. It may cause
slant paper feeding.
4. Slide the black movable flange (removed in step 1) onto the
spindle and into the end of the roll paper until it fixes into
place.
Attaching the spacer to the spindle
When you perform borderless printing on roll paper with a width
of 8 inches or 420 mm (A2), you need to attach a spacer to the
spindle.
To attach the spacer to the spindle, follow the steps below.
Note:
You cannot attach the spacer to the spindle when the gray attachments
for roll paper with a 3-inch core are attached to the spindle.
1. Slide the black movable flange off the end of the spindle.
260
Paper Handling
Downloaded from ManualsPrinter.com Manuals