Epson Stylus Pro 4800 Manual
Epson stylus pro 4800: product information
Hide thumbs
Also See for Stylus Pro 4800:
- Brochure & specs (16 pages) ,
- Setup manual (15 pages) ,
- Quick reference manual (12 pages)
Table of Contents
Advertisement
Printer Parts
-
Roll paper cover
Paper lever
Top cover
Paper lever
Ink cartridge
compartments
Roll paper
spindle
AC inlet
USB interface
connector
IEEE 1394 FireWire
®
interface connector
Printer Specifications
Printing
Printing
method
Control
Nozzle
panel
configuration
Resolution
Print direction
Control code
Line spacing
Paper feed speed 215 ±10 milliseconds per 1/4-inch line
RAM
Electrical
Specification
Input voltage range
Rated frequency range
Input frequency range
Rated current
Power consumption
Mechanical
Dimensions
Weight
8/05
Epson Stylus Pro 4800
On-demand ink jet
Photo ink set:
×
Black: 180 nozzles
3 (photo black/matte
black, light black, light light black)
×
Color: 180 nozzles
5 (cyan, magenta, light
cyan, light magenta, yellow)
Maximum 2880 dpi × 1440 dpi
Bidirectional/Unidirectional
Epson ESC/P
®
Raster
1/6 inch or programmable in
1/1440-inch increments
64MB
Description
90 to 264 V
50 to 60 Hz
49 to 61 Hz
1.0 A at 120 V
0.5 A at 220 V
Approx. 52 W or less (ISO 10561
Letter Pattern)
5 W or less in standby mode
1 W or less in power off mode
Width: 33.9 inches (848 mm)
Depth: 30.1 inches (764 mm)
Height: 14 inches (354 mm)
88 lb (40 kg) without ink cartridges
Epson Stylus Pro 4800 - 1
Advertisement
Table of Contents
Related Manuals for Epson Stylus Pro 4800
Summary of Contents for Epson Stylus Pro 4800
-
Page 1: Epson Stylus Pro
5 W or less in standby mode 1 W or less in power off mode Width: 33.9 inches (848 mm) Depth: 30.1 inches (764 mm) Height: 14 inches (354 mm) 88 lb (40 kg) without ink cartridges Epson Stylus Pro 4800 - 1... -
Page 2: Consumables And Accessories
0.5 mm) Always test samples of paper stock in the printer before purchasing large quantities or printing large jobs. When you use non-Epson paper or other media, you may need to adjust various settings and create special paper configurations. Safety Approvals Safety standards UL 60950, CSA 22.2 No. -
Page 3: User-Replaceable Parts
*Must be purchased within 12 months of purchase. Epson Paper and Other Media Epson papers, which are especially designed for the inks used in the printer, ensure high-quality results. You can purchase additional roll paper spindles and other accessories or options from the Epson Pro Graphics web site (http://prographics.epson.com) or your authorized Epson... -
Page 4: Error Messages
LOWER L (or R) INK LVR MNT REQ. — MNT TK NEAR FULL — MNT TNK FULL B Ink light on 4 - Epson Stylus Pro 4800 Explanation Response Paper loaded does not match the Press the source selected. setting: either You’re using the wrong printer driver. - Page 5 Pull out the green tab to unlock the print head. An error has occurred. Note the error number, then turn the printer off and back on. If the message remains, contact Epson. Ink cartridge chip error. Remove and reinstall the ink cartridge. If the message remains, replace the cartridge.
-
Page 6: Replacing An Ink Cartridge
It’s a good idea to keep a set of empty 110 ml cartridges on hand at all times in case you need to ship the printer. 6 - Epson Stylus Pro 4800 Explanation You tried to print while an error condition was present. -
Page 7: Checking Printer Status And Part Life
You can either print out a status check, or you can view the printer’s status on the LCD panel. 8/05 Epson Stylus Pro 4800 Epson Stylus Pro 4800 - 7... -
Page 8: Printing Status Information
Note: You can replace the ink cartridges, cutter blade, and maintenance tank yourself. Other printer parts need to be replaced by an authorized Epson service technician. The amount of ink left or the component life is indicated as follows: = 100–81% ink or service life remaining E*****F = 80–61%... -
Page 9: Checking And Cleaning The Print Head
1. Make sure paper is loaded in the paper tray. 2. Do one of the following to access the printer utilities: ❏ Mac OS X: Open the Epson Printer Utility in your Applications folder. Select Stylus Pro 4800 click ❏... -
Page 10: Aligning The Print Head
Follow these steps to align the print head using the control panel: 1. Make sure the printer is turned on. Then load Epson Enhanced Matte paper or the paper that came with the printer. -
Page 11: Replacing The Maintenance Tank
Replacement tanks are available from Epson (part number C12C890191). Note: You can purchase replacement items for your printer from Epson at (800) 873-7766, or by visiting the Epson Store www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-7766 for dealer referral. -
Page 12: Draining The Old Ink
Premium Semimatte Photo Paper, etc. The Matte Black cartridge is optimized for printing photographic images on matte or plain papers, such as Epson Enhanced Matte Paper and Epson Velvet Fine Art Paper. Generally, you should switch black ink cartridges only if you plan to run a large number of print jobs in the new mode. -
Page 13: Updating Your Printer Firmware
Information Updating Your Printer Firmware Before you begin using your printer, you should check for a newer version of firmware on the Epson support site and update your printer, if necessary. appears, remove the Downloading the Firmware 1. Navigate to http://www.support.epson.com in your browser. - Page 14 5. Click the button. You see the Firmware Firmware Updater Updater window. 6. Make sure your printer is on, its LCD is set to it is connected to your computer, then choose in the Printer list. 4800 14 - Epson Stylus Pro 4800 7.
-
Page 15: Related Documentation
For more information on using the LFP Remote Panel, click to see the electronic guide. You see the Firmware Updater window. 6. Make sure your printer is on, its LCD is set to it is connected to your computer, then choose in the Printer list. - Page 16 Epson Stylus Pro 4800 16 - Epson Stylus Pro 4800 8/05...