Epson STYLUS PRO 4400 Reference Manual page 216

3 Paper Source
button
4 Paper Feed
button
5 Paper Feed
button
216 The Control Panel
Downloaded from ManualsPrinter.com Manuals
Selects a paper source (Roll Auto Cut On
/Roll Auto Cut Off
Cuts the roll paper automatically after printing
if pressed and held for 3 seconds when Roll
Auto Cut On is selected.
Returns to the previous level when pressed in
the SelecType mode.
Feeds paper the in forward direction.
Ejects the cut-sheet paper when Sheet
selected as the paper source.
Feeds the roll paper before cutting it when Roll
Auto Cut On setting is selected as the
paper source.
Loads a sheet from the paper tray to the
printing position automatically if Sheet
selected as the paper source.
Selects a desired parameter from the selected
item if pressed in the SelecType mode.
Changes the parameters in forward order
when selecting a desired parameter in the
SelecType mode.
Feeds paper in the reverse direction as much
as the paper has been fed by using the Paper
Feed button .
Note:
If you have fed the paper forward by hand,
you cannot feed the paper in the reverse
direction by using this button.
Loads a sheet from the paper tray to the
printing position automatically if Sheet
selected as the paper source.
Selects a desired parameter from the selected
item if pressed in the SelecType mode.
Changes the parameter in the reverse order
when selecting a desired parameter in the
SelecType mode.
/Sheet )
is
is
is