Epson STYLUS PRO 4400 Reference Manual page 237

CUT METHOD
You can specify a cutting method: STANDARD, THIN PAPER, THICK,
FAST, or THICK, SLOW.
PPR FEED ADJ
You can set the paper feed amount. The range is -0.70 to 0.70%.
EJECT ROLLER
You can select AUTO, SHEET, ROLL CURLED, or ROLL NORMAL.
AUTO
SHEET
ROLL CURLED
ROLL NORMAL
DRYING TIME
You can set the ink drying time for each print head pass. The range
is 0 to 10 seconds.
SUCTION
You can set the suction pressure used to feed the printed-paper.
Select STANDARD, -1, -2, -3, or -4.
Downloaded from ManualsPrinter.com Manuals
The printer selects the most appropriate setting
automatically. When you use Epson special media,
usually select this setting.
If you want to print on cut-sheet paper that is non-Epson
special media, select this setting.
If you want to print on strongly curled roll paper that is
non-Epson special media, select this setting.
Note:
Make sure that the ink is dry enough on the paper
before the roller touches the media; otherwise, the ink
will soil the roller surface, which stamps on the prints.
If you want to print on roll paper that is non-Epson
special media, select this setting. When roll paper is
selected for the printer, this parameter is selected and
no feed roller is used. If you select this parameter while
using cut sheets, you need to eject the cut-sheet paper
one by one.
The Control Panel
4
4
4
4
4
4
4
4
4
4
4
4
237