Epson STYLUS PRO 4400 Reference Manual page 231

TIME OUT
The setting range is 30 to 300 seconds. If the cable of your printer
is unplugged or your printer hangs up for more than the set time
range, the print job is cancelled and the printer starts paper feed.
CUTTER ADJ
You can adjust the paper cutting position when printing with a
top and bottom margin of zero. This function prints cutter
adjustment patterns and you can select the appropriate cutting
position from them.
REFRESH MRGN
When you select ON, the printer cuts an extra print area after
borderless printing is used automatically.
SHEET SIZE CK
When you select ON, if the size of the cut-sheet paper loaded in the
printer does not match the size of data, the printer stops printing
and WRONG PAPER SIZE appears on the printer's control panel.
When OFF is selected, the printer continues to print even if the size
of the cut-sheet paper does not match the data, and the printer
may print beyond the paper.
AUTO NZL CK
When you select ON, the printer performs a nozzle check before
printing, for each print job.
Note:
❏ Do not select ON if you are using non-Epson special media, or if the
width of paper you are using is less than 210 mm.
❏ This setting is available only when you select ON for AUTO
CLEANING.
Downloaded from ManualsPrinter.com Manuals
The Control Panel
4
4
4
4
4
4
4
4
4
4
4
4
231