Paper Feed Or Paper Jam Problems Occur Frequently - Epson STYLUS PRO 4400 Reference Manual

❏ Make sure that the Roll Auto Cut On
Paper Source on the LCD. Press the Paper Source
if necessary. Then press and hold the Paper Source
for 3 seconds. The printer cuts the roll paper.
❏ Make sure that Normal Cut, Single Cut, or Double Cut is
selected as the Auto Cut in the printer driver. For Windows,
see "Making the Auto Cut setting" on page 49. For Mac OS
9.x, see "Making the Auto Cut setting" on page 137. For Mac
OS X, see "Auto Cut" on page 197.
❏ Cut the roll paper by hand if necessary. Check that the paper
thickness of the roll paper loaded in the printer matches the
paper specification (see "Paper" on page 360). If so, the paper
cutter may be blunt and require replacement. See "Replacing
the Paper Cutter" on page 303.
Note:
If you use roll paper other than Epson special media, see the user
documentation included with the paper, or contact your supplier.
Paper feed or paper jam problems occur
frequently
Try one or more of these solutions:
❏ Before loading paper and guiding it through the paper
insertion slot, adjust paper suction.
To adjust the paper suction using the printer driver, see
"Paper Configuration" on page 28 for Windows, see "Paper
Configuration" on page 120 for Mac OS 9.x, or see "Paper
Configuration" on page 194 for Mac OS X.
To adjust the paper suction using the control panel, see
"CUSTOM PAPER" on page 235.
338 Problem Solver
Downloaded from ManualsPrinter.com Manuals
is selected as the
button
button