Initial Setup - Onkyo TX-SR603/603E Instruction Manual

First Time Setup —Continued

Initial Setup

Digital Input
If you connect a component to a digital input jack, you
must assign that jack to an input selector. For example,
if you connect your CD player to the OPTICAL IN2
jack, you should assign that jack to the CD input selec-
tor. By default, the COAXIAL IN1 jack is assigned to
the DVD input selector, although this can be changed.
DIGITAL INPUT
Input selector buttons
1 Press the input selector button
for the source that you want to
DVD VIDEO 1 VIDEO 2
assign.
(Digital inputs cannot be assigned to
VCR 1 VCR 2
VIDEO 3 TAPE the TUNER input source)
CD
2 Press the [DIGITAL INPUT] but-
ton.
DIGITAL INPUT
The current assignment appears.
3 Press the [DIGITAL INPUT] but-
ton repeatedly to select COAX1,
COAX2, OPT1, OPT2, OPT3, or
DIGITAL INPUT
– – – – (analog).
• There are no assignments for
TUNER.
• VIDEO 4 is used only for digital
input from the front panel terminals.
Examples:
If you connect your DVD player to the
OPTICAL IN 2 jack, set "DVD" to
"OPT2."
If you want to listen to audio from the
component connected to the OPTICAL
IN 3 jack when the VIDEO 1 input
selector is selected, set "VIDEO1" to
"OPT3."
If you want to listen to audio from the
component connected to the COAX-
IAL IN 1 jack when the VIDEO 2 input
selector is selected, set "VIDEO2" to
"COAX1."
For input selectors that you don't want
to assign a digital input jack, set to
"---- (analog)."
43