Changing The Engine Oil Filter - Toro 74933 Operator's Manual

5. Slowly pour approximately 80% of the specified oil
into the filler tube and slowly add the additional oil to
bring it to the Full mark (Figure 49).
1
3
5
Figure 49
6. Start the engine and drive to a flat area. Check the oil
level again.
2
4
6
G008796

Changing the Engine Oil Filter

Service Interval: Every 200 hours
Note: Change the engine oil filter more frequently when
operating conditions are extremely dusty or sandy.
1. Drain the oil from the engine; refer to Changing the
Engine Oil (page 36).
2. Change the engine oil filter (Figure 50).
1
3
5
Note: Ensure that the oil filter gasket touches the
engine and then turn it an extra 3/4 turn.
3. Fill the crankcase with the proper type of new oil; refer
to Changing the Engine Oil (page 36).
37
2
4
6
3/4
Figure 50
G021395
G008748