Driving Forward Or Backward - Toro 74933 Operator's Manual
With 60in and 72in turbo force side discharge mower
Hide thumbs
Also See for 74933:
- Operator's manual (68 pages) ,
- Operator's manual (80 pages) ,
- Operator's manual (80 pages)
Table of Contents
Advertisement
motion control lever (out of neutral locked position).
Try starting the engine; the engine should not crank.
Repeat for other control lever.
3. Sitting on the seat, engage the parking brake, move
the blade control switch (PTO) to off, and move the
motion control levers to neutral lock position. Now
start the engine. While the engine is running, release the
parking brake, engage the blade control switch (PTO)
and rise slightly from the seat; the engine should stop.
4. Sitting on the seat, engage the parking brake, move
the blade control switch (PTO) to off, and move the
motion control levers to neutral lock position. Now
start the engine. While the engine is running, center
either motion control and move (forward or reverse);
the engine should stop. Repeat for other motion
control.
5. Sitting on the seat, disengage the parking brake, move
the blade control switch (PTO) to off, and move the
motion control levers to neutral lock position. Try
starting the engine; the engine should not crank.
Driving Forward or Backward
The throttle control regulates the engine speed as measured
in rpm (revolutions per minute). Place the throttle control in
the fast position for best performance. Always operate in the
full throttle position when mowing.
CAUTION
Machine can spin very rapidly. Operator may lose
control of machine and cause personal injury or
damage to machine.
• Use caution when making turns.
• Slow the machine down before making sharp
turns.
Using the Motion Control Levers
1. Motion control
lever-neutral lock position
2. Center, unlocked position
3. Forward
Driving Forward
Note: The engine will stop if the traction control levers are
moved with the parking brake engaged.
To stop, pull the motion control levers to the neutral position.
1. Release the parking brake; refer to Releasing the
Parking Brake (page 19).
2. Move the levers to the center, unlocked position.
3. To go forward, slowly push the motion control levers
forward (Figure 22).
22
Figure 21
4. Backward
5. Front of machine
Advertisement
Table of Contents
