Changing The Engine Oil - Toro 74933 Operator's Manual

2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position (Figure 47).
1
3
6
9
8
Figure 47
2
5
4
7
10
G008792

Changing the Engine Oil

Service Interval: After the first 8 hours
Every 100 hours (more often in dirty or dusty
conditions)
Note: Dispose of the used oil at a recycling center.
1. Park the machine so that the rear is slightly lower than
the front to ensure that the oil drains completely.
2. Disengage the PTO, move the motion control levers to
G021395
the neutral locked position, and set the parking brake.
3. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
4. Drain the engine oil (Figure 48).
1
3
4
36
2
4
5
Figure 48
G021395
G008793