Table of Contents
Advertisement
Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule
Maintenance Service
Interval
After first 10 hours
After first 50 hours
Every 50 hours
Every 100 hours
Every 150 hours
Every 200 hours
Every 400 hours
Every 800 hours
Every 1000 hours
Maintenance Procedure
• Check Fan and Alternator Belt Tensions
• Change Hydraulic Filter
• Torque Wheel Lug Nuts
• Change Engine Oil and Filter
• Check Engine RPM (idle and full throttle)
• Inspect Air Filter, Dust Cup, and Burp Valve
• Lubricate All Grease Fittings
• Check Battery Cable Connections
• Check Fan and Alternator Belt Tensions
• Check Battery Fluid Level
• Check Traction Belt
• Change Engine Oil and Filter
• Change Air Filter
• Change Hydraulic Filter
• Torque Wheel Lug Nuts
• Change Hydraulic Fluid
• Change Fuel/Water Separator Filter
• Change Fuel Pre Filter
• Inspect Traction Cable Movement
• Inspect Spider Coupling for Wear
• Check Engine RPM (idle and full throttle)
• Adjust valves
• Replace Moving Hoses
• Coolant System – Flush/Replace Fluid
• Fuel Tank – Drain/Flush
• Hydraulic Tank – Drain/Flush
35
Advertisement
Table of Contents
