Toro 30873 Operator's Manual page 23

InfoCenter Icon Description (cont'd.)
Using the Menus
To access the InfoCenter menu system, press the menu access
button while at the main screen. This will bring you to the
main menu. Refer to the following tables for a synopsis of
the options available from the menus:
Main Menu
Menu Item
Faults
Service
Diagnostics
Operator should put machine
in neutral
Engine start denied
Engine shutdown
Engine coolant too hot
Hydraulic oil too hot
DPF ash accumulation
notification. Refer to Servicing
the Diesel Particulate Filter
(DPF) in the maintenance
section for details.
Sit down or set parking brake
Description
The Faults menu contains
a list of the recent machine
faults. Refer to the Service
Manual or your Authorized
Toro Distributor for more
information on the Faults
menu and the information
contained there.
The Service menu contains
information on the machine
such as hours of use and other
similar numbers.
The Diagnostics menu
lists various states that the
machine currently has. You
can use this to troubleshoot
certain issues as it will quickly
tell you which machine
controls are on and which are
off.
Settings
About
Service
Menu Item
Hours
Counts
Diagnostics
Menu Item
Left Deck
Center Deck
Right Deck
Traction Pedal
Traction
HI/LO Range
PTO
Engine Run
Settings
Menu Item
Units
Language
LCD Backlight
LCD Contrast
Protected Menus
Protect Settings
Auto Idle
Mow Speed
23
The Settings menu allows
you to customize and modify
configuration variables on the
InfoCenter display.
The About menu lists the
model number, serial number,
and software version of your
machine.
Description
Lists the total number of hours
that the machine, engine and
fan have been on, as well
as the number of hours the
machine has been transported
and overheated.
Lists the number of starts,
deck PTO cycles and fan
reversals the machine has
experienced.
Description
Refer to the Service
Manual or your Authorized
Toro Distributor for more
information on the Engine
Run menu and the information
contained there.
Description
Controls the units used on the
InfoCenter. The menu choices
are English or Metric.
Controls the language used
on the InfoCenter*.
Controls the brightness of the
LCD display.
Controls the contrast of the
LCD display.
Allows the maintenance
director to access protected
menus by inputting a
passcode.
Allows the ability to change
the settings in the protected
settings.
Controls the amount of time
allowed before idling the
engine when the machine is
not in use.
Controls the maximum speed
while in mow (low range).