Table of Contents
Advertisement
Multifeed Detection tab
36
Multifeed detection aids in document processing by detecting
documents that may go through the feeder overlapped. Multifeed can
happen due to stapled documents, adhesives on documents or
electrostatically charged documents. The Multifeed Detection tab
provides the following options.
Ultrasonic Detection — check this option to set multifeed detection.
• Sensitivity — controls how aggressively the scanner will work to
determine if more than one document is fed into the transport.
Multifeeds are triggered by detecting air gaps between documents.
This allows multifeed detection to be used with job sets containing
documents with mixed thicknesses.
- Off
- Low: the least aggressive setting and is less likely to detect
labels, poor quality, thick or wrinkled documents as multifed
documents.
- Medium: use Medium sensitivity if your application has varying
document thickness or labels attached to the document.
Depending on the label material, most documents with labels
should not be detected as a multifed document.
- High: the most aggressive setting. This is a good setting to use if
all documents are similar in thickness to 75.2 g/m
paper.
2
(20-lb.) Bond
A-61849/ISIS January 2016
Advertisement
Table of Contents
