Table of Contents
Advertisement
38
• Stop Scanning - leave paper at exit: scanning will stop and the last
portion of the multifed document will be held at the transport's exit,
and control will return to the scanning application (i.e., ends the job).
Image(s) of the multifed document will not be generated. Clear any
documents from the paper path prior to restarting the scan session
from the scanning application.
• Continue Scanning: the scanner will continue to scan. Image(s) of
the multifed document will be generated.
• Pause Scanning - generate image(s): scanning will stop but the
scanning application will be waiting for additional images (i.e., stops
the feeder). Image(s) of the multifed document will be generated.
Scanning may be resumed by pressing the Start/Pause button on
the Operator Control Panel. Scanning may be stopped by pressing
the Stop button on the Operator Control Panel or via the scanning
application.
This option allows you to inspect a preview image of the scanned
page and choose to Accept the scanned image or Rescan the page
and discard the image from the scan that triggered a multifeed alarm.
The scanned images will not be sent to the host application until
accepted. This option allows all multifeed events to be handled at the
scanner. No image manipulation is required in the scanning
application. This option also allows you to stay in front of the scanner
reducing wasted movement and fatigue. This option is provided by
the scanner. No changes to the scanning application are
required.
A-61849/ISIS January 2016
Advertisement
Table of Contents
