Multifeed Detection Tab - Kodak ScanMate i900 Series Scanning Setup Manual

Multifeed Detection tab

A-61734 March 2012
The Multifeed tab provides the following options.
Multifeed Detection
Length Detection ⎯ this option can be enabled or disabled. The
default is disabled. If enabled, select the maximum length of the
document that can be scanned without a multi-feed being detected.
Length detection is used when scanning same-sized documents to
check for overlap. For example, if you are scanning 8.5 x 11-inch (A4)
documents in portrait mode, enter a value of 11.25 inches (28.57 cm) in
the Max Length field.
• Auto Set: automatically sets the maximum length value to .50-inch
(1.27 cm) greater than the length of the currently selected page size.
Action — select what action you want the scanner to take when a
multifeed is detected.
• Continue Scanning: the scanner will continue to scan. The user-
configured multifeed sound will be made by the scanner.
NOTE: Clicking the Speaker icon will display the Open dialog box
allowing you to select the desired tone (.wav file) for your alarm.
19