Table of Contents
Advertisement
Scanner tab
30
The Scanner tab provides the following options.
Document Feeder
Paper Source — ADF (automatic document feeder). All documents will
be scanned from the input elevator.
NOTE: The Automatic and Flatbed options are only available if you
had the flatbed accessory attached when the scanning
application connected to the scanner.
Feeder Position — select one of the following input elevator positions:
• Automatic: looks for paper in the document feeder first. If there are
no documents in the input elevator, the scanner will scan from the
flatbed.
• Automatic - 100 Sheets: looks for paper in the input elevator first, if
there are no documents in the input elevator, the scanner will scan
from the flatbed. This selection is recommended when you are
scanning between 25 and 100 sheets from the input elevator.
• Automatic - 250 Sheets: looks for paper in the input elevator first, if
there are no documents in the input elevator, the scanner will scan
from the flatbed. This selection is recommended when you are
scanning between 100 and 250 sheets from the input elevator.
A-61849/ISIS January 2016
Advertisement
Table of Contents
