Table of Contents
Advertisement
Advanced Timer Recording
Manual timer recordings
Preparation:
Turn on the television and select the appropriate video
input to suit the connections to this unit.
]RAM\ If the disc is protected, release protection
(
64).
Insert a disc with enough remaining blank space.
Confirm that the clock on the unit's display is set to
the correct time.
If connected via a digital satellite receiver, set
channel there before timer recording starts.
, to select "New Timer
Programme", then
, to move through the items
and , to set the items.
Name:
– TV Station Name/External Input
Date:
– You can set a daily or weekly
programme
Start (start time)/Stop (end time):
– Hold button to change in 30-minute
increments or decrements.
Drive:
– HDD or DVD
When the recording drive is "DVD" and
there is not enough remaining space,
recording automatically switches to the
"HDD" (
Mode:
– Recording mode (
RENEW
– Auto Renewal Recording (
([HDD])
ON/OFF
Programme Name:
Press [OK] (
Downloaded From DvDPlayer-Manual.com Panasonic Manuals
Timer
Remain
HDD
Recording
No.
Name
Date
Start
New Timer Programme
Press OK to store new programme.
OK
RETURN
OK
Timer
Remain
HDD
Recording
Name
Date
Start
-- / -- ---
-- : --
Please set Channel.
OK
RETURN
When recording digital satellite
programmes, select "AV2".
.
(
right, Tips)
33, Relief Recording).
26)
33)
72, Entering Text).
OK
– The timer icon is displayed in left column.
– "" lights on the unit's
display to indicate timer
recording standby has
been activated.
– Repeat steps – to
programme other recordings.
– Press [ DVD] to turn the unit off.
Notes
"" on the unit's display fl ashes when the unit cannot go to timer
30:24 SP
DVD
1:58 SP
FRI 10/10/08 12:54:00
recording standby.
HDD
Drive
Stop
DVD
Mode
space
If two timer recording times overlap, the fi rst recording always
has priority. The second recording will start only after the fi rst
recording has fi nished.
Recorded subtitles cannot be deleted later.
A Timer Recording will not start while a disc is being formatted,
deleted or fi nalised. The recording begins afterwards.
Tips
To exit the timer recording list
Press [PROG/CHECK].
"Date" Setting
Each press of [] changes items in the order below.
(Each press of [] changes items in the reverse order.)
Current date
SAT
30:24 SP
DVD
1:58 SP
SUN
FRI 10/10/08 12:54:00
Weekly timer
HDD
Stop
Mode
DVD
Titles recorded using the same daily or weekly timer are bundled
-- : --
---
SP
and displayed as a "group" in the Direct Navigator screen (
Programme Name
except when using Auto Renewal Recording.
You can also use the numbered buttons to enter "Name", "Date",
"Start" and "Stop".
0
--
9
Number
You can also press [DRIVE SELECT] to switch the drive and
[REC MODE] to switch "Mode".
To record programmes from digital
satellite receiver by RGB signals
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
Preparation:
Make sure you connect the AV2 input terminal of
this unit to "VCR Scart terminal" of a SKY Digital
STB/digital receiver with a 21-pin scart cable
(
11).
Set "AV2 Input" to "RGB/Video" or "RGB" (
Set your Sky Digital STB to output "RGB" signals.
Follow the steps indicated for "Manual
timer recordings" (
Notes
After setting the Personal Planner programmes as required, Sky
Digital STB must be kept turning on (not set to standby) to ensure
continuous output of RGB signals.
&
One month later
minus one day
SUN-SAT
MON-SAT
MON-FRI
Daily timer
left).
No. Name
01
BBC 1 15
34)
71).
31
Advertisement
Table of Contents
